Low Profile - Business Machine Casters - 33 Series

Our Business Machine Caster Series will give you the quality and high load capacities you are looking for to support your valuable equipment, without having to sacrifice a low profile design. Their high load capacity and low profile design make them ideal solutions for copiers, computer storage devices, refrigerated displays, and vending machines.
  • Capacity up to 260 lbs.
  • Sealed raceway is standard with top plate fastener type
  • High capacities with low overall heights.
  • Bright zinc finish standard.
  • Case hardened double ball raceways provide extra capacity & durability.
  • Thermal plastic rubber wheels do not mark floors.
  • All wheels are Plain Bore ( No beaings in the wheels )

Most photos on this page can be enlarged by clicking on the photo.
Used On:

 Business Machines - Copiers - Printers - Diagnostic Equipment - Heavy Computer Carts and Stands - Small Vending Machines
 Magazine Racks - Store Check-out Racks - Displays - Video Games - Pianos - Etc.


The most important decision when selecting a general duty caster is the type of wheel material to use. The following are the factors to consider: Floor Material and Surface, Weight and use of object. Always choose more capacity in the casters than the maximum amount of weight that will be needed. For most objects, figure the weight of the object and divide by the number of casters that you will install. As a rule of thumb, add 20% to that amount for safety. For objects that will be sitting in one place for long periods of time, either a hard wheel should be used or a softer wheel with twice the capacity for the weight that it will hold. Softer wheel materials may be required to protect floors but those wheel materials have a tendency to develop flat spots from sitting in one place for long periods of time. By only using half of their capacity, the wheels should not develop flat spots.

Wheel Materials Available in this caster: to learn more about wheel materials and hardness, click here.
Thermo Plastic Rubber ( TPR )
• Hardness: 55 - 65 Shore A
• Temperature rating: -40 to 180 degrees Fahrenheit, intermittent service. (120 degrees continuous service).
• Precision molded high quality Thermal Plastic Rubber mechanically locked to a durable polyolefin core.
• Provides a smooth, cushioned ride.
• Offers floor protection, is non marking and non-conductive.
• Resistant to most chemicals, oils, grease, cleaning agents, solvents and water.
• Ball bearings provide greater roll-ability and less effort to push a load.
• Wheel Color: Gray on a Beige center.
Polyolefin
• Hardness: 60 to 70 Shore D
• Temperature rating: -45 to 180 degrees Fahrenheit.
• Made from high quality polyolefin.
• Economical hard durometer wheel, excellent for applications demanding durability, capable of taking extreme shock loads.
• Light weight, high capacity.
• Offers floor protection, is non marking and non-conductive.
• Resistant to water, oils, grease, gasoline and most commonly used chemicals.
• Wheel Color: Black.
Sample Photos & Options
Dual Wheel Plate Mount
2 3/4" x 3 3/4" Plate
Thermo Plastic Rubber
2" Wheels
Single Wheel Stem Mount
7/16" x 1 1/2" Long
Grip Ring Stem
Polyolefin 2" Wheel
Single Wheel Stem Mount
12" - 13 x 1 1/2" Long
Threaded Stem
Polyolefin 2" Wheel
 
Dual Wheel Plate Mount
2 3/4" x 3 3/4" Plate
Thermo Plastic Rubber
2" Wheels
Dual Wheel Stem Mount
7/16" x 1 1/2" Long
Grip Ring Stem
Thermo Plastic Rubber
2" Wheels
 
Available Stems
Threaded Stem
Our Threaded Stem is available in the following size:1/2" - 13 x 1 1/2" Long

If you are not sure what size thread you need: THE SAFEST THING TO DO IS TO TAKE THE CASTER OR GLIDE TO A HARDWARE STORE LIKE HOME DEPOT OR LOWES, ANY STORE WHERE THEY SELL NUTS AND BOLTS. Find a nut that fits on the threads and THAT is the size of your threads. This is a "Can't Miss" approach to the threaded stem problem.

Grip Ring Stem
Our Grip Ring Stem is available in the following size:7/16" x 1 1/2" Long



3322-x-TRP
Dual Wheel Low Profile Swivel Caster - Soft Gray Non-Marking Wheels
Plate or Stem Mountings available
Dual 2" x 13/16" wide wheels
Swivel Caster
220 lbs Capacity Each
Soft Non-Marking Rubber Wheels
Zinc Plated Steel Construction
Plain Bore Wheel
Over All Height - 2 13/16"
Swivel Radius 1 7/8"
Optional Mountings
Wheel Color Gray


3320-x-HDP
Low Profile Swivel Caster - Hard Polyolefin Wheel
Plate or Stem Mountings available
2" x 1 13/16" wide wheel
Swivel Caster
260 lbs Capacity Each
Hard Polyolefin Wheel
Zinc Plated Steel Construction
Plain Bore Wheel
Over All Height - 2 13/16"
Swivel Radius 1 7/8"
Optional Mountings
Wheel Color Black



For Hardwood Floors Capacity up to 80 lbs each Capacity up to 150 lbs each Pneumatic & Flat Free Casters Standard Low Profile Casters
For Carpet Capacity up to 150 lbs each Capacity up to 230 lbs each Light Duty Flat Free Casters Low Profile with Colored Wheels
With Removable Wheels Capacity up to 230 lbs each Capacity up to 260 lbs each
With Soft Wheels Capacity up to 260 lbs each Capacity up to 300 lbs each Small Wheels Bed Casters
With Hard Wheels Capacity up to 300 lbs each Capacity up to 350 lbs each Rubber Wheels Sockets & Hardware
With Metric Stems Capacity up to 350 lbs each Bolt Hole / Hollow Kingpin Rubber on Aluminum Wheels Shopping Cart Casters & Wheels
With U Brackets Capacity up to 450 lbs each Pneumatic & Flat Free Wheels
Heavy Duty - HIGH CAPACITY Capacity up to 900 lbs each FOOT MASTER Overview Polyurethane Wheels Caster Tips and Tricks
Tan Casters FOOT MASTER GD Series Poly on Aluminum Wheels Contact Us
Stemless Casters Total Locking Plate Mounted FOOT MASTER GDN Seres Polyurethane on Iron Wheels About Us
Safety Casters Total Locking Stem Mounted FOOT MASTER GDR Series Polyolefin Wheels What Others Say about US
Glides and Sliders Total Locking Hollow Kingpin Phenolic Wheels Site Map
HELP Measuring   FOOT MASTER GDS Series Steel Wheels Home
Website Maintenance & Design by Webster Site Design