Hardwood Floor Casters with Soft Wheels

Hardwood Floor Casters with Soft Wheels can get "traction" on a hard surface. Just like the rubber tires on your car, caster wheels will have some sort of soft material applied to a wheel. When a wheel is rolling on a hard floor, it can not scratch the floor. Hard floors can get damaged even with soft wheels. If the floors are dirty and grit or sand becomes embedded into the tire, it can scratch the floor. If the wood used on the floor is soft, it is possible that the wheel could "dent" the wood. We will not "recommend" any type of caster for a wood floor. We can tell you that the "softest wheel" will work the best. A good rule of thumb is that if you have a wood floor, find out what the Janka Rating is for the floor. If the Janka rating is higher than 1290 ( the hardness of solid Red Oak ), you should be able to use wheels with soft polyurethane wheels. If it is softer than that, you must use a soft rubber.

.
We believe that we have the finest collection of Chair Casters and Furniture Casters
available in one place on the internet!


Our SUMO SERIES is recommended for chairs of larger people and for heavy furniture. If you need a caster with a high capacity, look for our SUMO SERIES chair and furniture casters!

Click Here to see all of the SUMO SERIES.
Hard to Find Casters Hard to Find 10mm Grip Ring Stem is now available on some of our casters. The stem is 10mm ( .393" ) diameter x 7/8" long.
Please measure carefully before ordering this stem!
Before you choose any of these casters, you should learn how to select the proper caster for your specific project. We'll teach you how to measure stems and to choose the correct caster to roll safely on your type of flooring. Click here or the Stop sign to go to School.

Thank You
EZ Clean Removable Wheel Casters with Soft Polyurethane Wheels
Good for most wood floors with a Janka Rating of 1290 or greater. Works well on Tile and other Hard Floor Surfaces.


TWBN-50U-BK
Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5. Putting more weight than recommended will make the chair more difficult to roll.

For more detailed information about cleaning click here.
50mm (2" Diameter) Hooded
Twin Wheel
75 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tire
Steel Axle
Color Black
Over All Height - Stem Caster - 2 1/2"
Over All Height - Plate Caster - 2 5/8"
Swivel Radius - 2 1/4"
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 7/16" x 1 7/16" Long
Grip Ring Stem - 10mm" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
U-Plate - 3/4" ID with 1/4" Thru Bolt
Threaded Stem - 1/4-20 x 3/4" Long
Threaded Stem - 5/16-18 x 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Threaded Stem - M6x1.0 x 12mm Long
Threaded Stem - M8x1.25 x 12mm Long
Threaded Stem - M8x1.25 x 25mm Long
Threaded Stem - M10x1.5 x 15mm Long
Also See our          for more Casters!.
Rubber Wheels
Good for most wood floors - Use Soft Neoprene Rubber wheels for floors with Janka rating less than 1290.


OMEGA2-GR223-BC
2" Chrome Hooded Caster with Soft Neoprene Rubber Wheels
The best caster we have for hard wood floors!!
Single wheel metal body caster by Shepherd. Chrome plated body with Ball Bearings in the swivel and Precision Sealed Ball Bearings in the wheel. The wheel is made of Extra Soft Neoprene Rubber and is the best caster to use for ultimate floor protection. The wheel design is unique because it has a shield on the center of the wheel. The wheel rotates around that shield ( called a thread guard ) and helps keep hair and threads from wrapping around the axle. This is an excellent caster for both hardwood floors, tile and some softer woods like pine. When putting this caster on a chair, we would not like to see more than 200 lbs on a set of 5 casters even though the capacity is 75 lbs per caster. The chair will be difficult to roll with more than that weight. If you weigh more than 200 lbs, we suggest that you use a 3" wheel.
2" Hooded
Single 15/16" wide Wheel
75 lbs Dynamic Capacity per caster
Chrome Plated Steel Construction
Extra Soft Neoprene Rubber Tire ( 50 - 60 A)
Dual Ball Bearing Raceways.
Precision Ball Bearing Wheels.
Wheel Color Black
Over All Height - 2 3/4"
Swivel Radius - 2"
Grip Ring Stem - 7/16" x 7/8" Long
3" Chrome or Black Hooded Caster with Soft Neoprene Rubber Wheels
The best caster we have for hard wood floors!!
Single wheel metal body caster by Shepherd. Chrome plated or Gloss Black body with Ball Bearings in the swivel and Precision Sealed Ball Bearings in the wheel. The wheel is made of Extra Soft Neoprene Rubber and is the best caster to use for ultimate floor protection. The wheel design is unique because it has a shield on the center of the wheel. The wheel rotates around that shield ( called a thread guard ) and helps keep hair and threads from wrapping around the axle. This is an excellent caster for both hardwood floors, tile and some softer woods like pine. When putting this caster on a chair, we would not like to see more than 275 lbs on a set of 5 casters even though the capacity is 110 lbs per caster. The chair will be difficult to roll with more than that weight. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster below.
3" Chrome 3" Black


OMEGA3-BC


OMEGA3-BK
3" Hooded
Single 15/16" wide Wheel
110 lbs Dynamic Capacity per caster
Chrome Plated or Black Finish
Steel Construction
Extra Soft Neoprene Rubber Tire ( 50 - 60 A)
Dual Ball Bearing Raceways.
Precision Ball Bearing Wheels.
Wheel Color Black
Over All Height -3 7/8"
Swivel Radius - 2 7/8"
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Flat Top Plate - 1 1/4" x 2 3/8"

BlackTwin Wheel Caster with Non-Marking Wheels
Thermoplastic Elastomer ( Rubber / Plastic Mixture ) for Strength

Good for hard wood floors!!
Twin wheel nylon body caster by Shepherd. Black body with Black non-marking Thermoplastic Rubber tires on a nylon wheel. This is an excellent caster for both hardwood floors and tile where you want the look of a twin wheel caster. When putting this caster on a chair, we would not like to see more than 200 lbs on a set of 5, 50mm casters, 225 on a set of 5, 60mm casters and no more than 275 lbs on a set of 5, 75mm casters. Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster below.
50mm ( 2" wheel ) 60mm ( 2 3/8" wheel ) SUMO SERIES
75 mm ( 3" Wheel )


SOFT50-BK


SOFT60-BK


SOFT75-BK
75 lbs Dynamic Capacity
Over All Height - 2 1/4"
Swivel Radius - 1 13/16"
100 lbs Dynamic Capacity
Over All Height - 2 5/8"
Swivel Radius - 2 1/16"
165 lbs Dynamic Capacity
Over All Height - 3 1/4"
Swivel Radius - 2 1/2"
Black Twin Wheel
Solid Nylon Construction
Steel Axle
Optional Wheel Brake
Thermoplastic Elastomer Tires
Soft 70-75/A durometer
Color Black
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2"
Threaded Stem - 5/16-18 x 1" Long
Threaded Stem - 3/8-16 x 3/4" Long

2 Tone Gray Twin Wheel Caster with Non-Marking Wheels
Thermoplastic Elastomer ( Rubber / Plastic Mixture ) for Strength

Good for hard wood floors!!
Twin wheel nylon body caster by Shepherd. Light Gray body with Dark Gray non-marking Thermoplastic Rubber tires on a nylon wheel. This is an excellent caster for both hardwood floors and tile where you want the look of a twin wheel caster. When putting this caster on a chair, we would not like to see more than 200 lbs on a set of 5, 50mm casters, 225 on a set of 5, 60mm casters and no more than 275 lbs on a set of 5, 75mm casters. Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster below.
50mm ( 2" wheel ) 60mm ( 2 3/8" wheel ) SUMO SERIES
75 mm ( 3" Wheel )


SOFT50-GR


SOFT60-GR


SOFT75-GR
75 lbs Dynamic Capacity
Over All Height - 2 1/4"
Swivel Radius - 1 13/16"
100 lbs Dynamic Capacity
Over All Height - 2 5/8"
Swivel Radius - 2 1/16"
165 lbs Dynamic Capacity
Over All Height - 3 1/4"
Swivel Radius - 2 1/2"
Gray Twin Wheel
Solid Nylon Construction
Steel Axle
Optional Wheel Brake
Thermoplastic Elastomer Tires
Soft 70-75/A durometer
Color Gray
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2"
Threaded Stem - 5/16-18 x 1" Long
Threaded Stem - 3/8-16 x 3/4" Long
Soft Polyurethane Wheels
Can be used on wood floors with Janka rating of MORE than 1290.



OMEGA3-VP
SUMO SERIES - HEAVY DUTY CHAIR & FURNITURE
3" Chrome Hooded Caster with Soft Polyurethane Wheels
Good caster for hard wood floors & tile when Extra Capacity is needed!!
Our SUMO SERIES is recommended for chairs of larger people or for heavy furniture. If you need a caster with a high capacity, our SUMO SERIES is for you! Single wheel metal body caster by Shepherd. Chrome plated body with Ball Bearings in the swivel and Precision Sealed Ball Bearings in the wheel. The wheel is made of clear, non-marking, Soft Polyurethane and will not mark hard floor surfaces. The wheel design is unique because it has a shield on the center of the wheel. The wheel rotates around that shield ( called a thread guard ) and helps keep hair and threads from wrapping around the axle. This is an excellent caster for both hardwood floors and tile. This caster will work well at weights up to around 400 lbs on a set of 5.
3" Hooded
Single 15/16" wide Wheel
120 lbs Dynamic Capacity per caster
Chrome Plated
Steel Construction
Soft Polyurethane Tire ( 85 - 90 A)
Dual Ball Bearing Raceways.
Precision Ball Bearing Wheels.
Wheel Color - Clear
Over All Height -3 7/8"
Swivel Radius - 2 7/8"
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Flat Top Plate - 1 1/4" x 2 3/8"


TWHN-50U-BK
50mm Black Hooded Nylon Caster with Soft Polyurethane Tires.
Available with a variety of stem options.

Exceptional Quality
Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile where you want the look of a hooded twin wheel caster. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5, Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster above.
50mm (2" Diameter) Hooded
Twin Wheel
75 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tire
Optional Wheel Brake
Steel Axle
Color Black
Over All Height - Stem Caster - 2 1/4"
Over All Height - Plate Caster - 2 3/8"
Swivel Radius - 1 3/4" Non-Brake
Swivel Radius - 2 7/16" Brake
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 7/16" x 1 7/16" Long
Grip Ring Stem - 10mm" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
U-Plate - 3/4" ID with 1/4" Thru Bolt
Threaded Stem - 1/4-20 x 3/4" Long
Threaded Stem - 5/16-18 x 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Threaded Stem - M6x1.0 x 12mm Long
Threaded Stem - M8x1.25 x 12mm Long
Threaded Stem - M8x1.25 x 25mm Long
Threaded Stem - M10x1.5 x 15mm Long
Hard to Find Casters


TWHN-50U-TN
50mm TAN Hooded Nylon Caster with Soft Polyurethane Tires.
Available with a variety of stem options.

Exceptional Quality
Twin wheel nylon body caster. TAN body with TAN non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile where you want the look of a hooded twin wheel caster. Can also be used on carpet. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5, Putting more weight than recommended will make the chair more difficult to roll.
50mm (2" Diameter) Hooded
Twin Wheel
75 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tire
Steel Axle
Color Tan
Over All Height - Stem Caster - 2 1/4"
Over All Height - Plate Caster - 2 3/8"
Swivel Radius - 1 3/4" Non-Brake
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 7/16" x 1 7/16" Long
Grip Ring Stem - 10mm" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
U-Plate - 3/4" ID with 1/4" Thru Bolt
Threaded Stem - 1/4-20 x 3/4" Long
Threaded Stem - 5/16-18 x 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Threaded Stem - M6x1.0 x 12mm Long
Threaded Stem - M8x1.25 x 12mm Long
Threaded Stem - M8x1.25 x 25mm Long
Threaded Stem - M10x1.5 x 15mm Long


TWN-60U-BK
60mm Un-Hooded Nylon Caster with Soft Polyurethane Tires.
Available with a variety of stem options.

Exceptional Quality
Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile where you want the look of a un-hooded twin wheel caster. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5. Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster above.
60mm Un-Hooded
Twin Wheel - 2 3/8" Diameter
110 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tires
Optional Wheel Brake
Steel Axle
Color Black
Over All Height - 2 3/4"
Swivel Radius - 2" Non-Brake
Swivel Radius - 3 1/16" Brake
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 7/16" x 1 7/16" Long
Grip Ring Stem - 10mm" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
U-Plate - 3/4" ID with 1/4" Thru Bolt
Threaded Stem - 1/4-20 x 3/4" Long
Threaded Stem - 5/16-18 x 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Threaded Stem - M6x1.0 x 12mm Long
Threaded Stem - M8x1.25 x 12mm Long
Threaded Stem - M8x1.25 x 25mm Long
Threaded Stem - M10x1.5 x 15mm Long


TWUN-75U-BK
75mm Black Hooded Nylon Caster with Soft Polyurethane Tires.
Available with a variety of stem options.

Exceptional Quality
Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile where you want the look of a un-hooded twin wheel caster. When putting this caster on a chair, we would not like to see more than 250 lbs on a set of 5, Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster above.
75mm (3" Diameter) Un-Hooded
Twin Wheel
110 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tire
Optional Wheel Brake
Steel Axle
Color Black
Over All Height - Stem Caster - 3 1/2"
Over All Height - Plate Caster - 3 3/4"
Swivel Radius - 2 3/8" Non-Brake
Swivel Radius - 3 7/16" Brake
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 7/16" x 1 7/16" Long
Grip Ring Stem - 10mm" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
U-Plate - 3/4" ID with 1/4" Thru Bolt
Threaded Stem - 1/4-20 x 3/4" Long
Threaded Stem - 5/16-18 x 1/2" Long
Threaded Stem - 3/8-16 x 3/4" Long
Threaded Stem - M6x1.0 x 12mm Long
Threaded Stem - M8x1.25 x 12mm Long
Threaded Stem - M8x1.25 x 25mm Long
Threaded Stem - M10x1.5 x 15mm Long
50mm ( 2" ) Hooded Metal Body Caster with Soft Polyurethane Tires.
Available in Chrome, Black, Windsor Antique and Brass
Available with a variety of stem options.

Premium Quality Twin wheel metal body caster by Shepherd. Four body colors to help match your decor with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile. The Chrome caster and Brass caster are real plated metal on the hood and the Black and Windsor Antique finishes are powder coated for long lasting beauty. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5. Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster above.
Chrome Flat Black Windsor Antique Brass


PAC50U-BC


PAC50U-BK


PAC50U-WA


PAC50U-BR
50mm (2" Diameter) Wheels
Twin Wheel
75 lbs Dynamic Capacity per caster
Solid Metal Body Construction
Soft Polyurethane Tire
Steel Axle
Colors Chrome, Black, Windsor Antique , Brass
Over All Height - Stem Caster - 2 3/8"
Over All Height - Plate Caster - 2 11/16"
Swivel Radius - 1 3/4"
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Threaded Stem - 5/16-18 x 1" Long
Threaded Stem - 3/8-16 x 3/4" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square
60mm ( 2 3/8" ) Hooded Metal Body Caster with Soft Polyurethane Tires.
Available in Chrome, Black, Windsor Antique and Brass
Available with a variety of stem options.

Premium Quality Twin wheel metal body caster by Shepherd. Four body colors to help match your decor with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile. The Chrome caster and Brass caster are real plated metal on the hood and the Black and Windsor Antique finishes are powder coated for long lasting beauty. When putting this caster on a chair, we would not like to see more than 225 lbs on a set of 5. Putting more weight than recommended will make the chair more difficult to roll. If you weigh more than 275 lbs, we suggest that you use the 3" single wheel Polyurethane Caster above.
Chrome Flat Black Windsor Antique Brass


PAC60U-BC


PAC60U-BK


PAC60U-WA


PAC60U-BR
60mm (2 3/8" Diameter) Wheels
Twin Wheel
100 lbs Dynamic Capacity per caster
Solid Metal Body Construction
Soft Polyurethane Tire
Steel Axle
Colors Chrome, Black, Windsor Antique , Brass
Over All Height - Stem Caster - 2 7/8"
Over All Height - Plate Caster - 3 1/16"
Swivel Radius - 2 3/16"
Available Stems & Plate - Click for Photos:
Grip Ring Stem - 7/16" x 7/8" Long
Grip Ring Stem - 3/8 x 1" Long
Grip Neck Stem - 5/16 x 1 1/2" Long
Threaded Stem - 5/16-18 x 1 1/4" Long
Threaded Stem - 3/8-16 x 3/4" Long
Flat Top Plate - 1 1/2" x 1 1/2" Square


CONTEMP-65
65mm Black Single Wheel Contempory Caster with Soft Polyurethane Wheel.
Really Different - Really Cool !!
This very contemporary style single wheel caster has a single Soft Polyurethane wheel which is 1" wide and provides a large footprint on your floor. Black body with Gray non-marking Soft Polyurethane wheel is an excellent caster for some hardwood floors and tile.
65mm (2 1/2" Diameter)
Single 1" Wide Wheel
110 lbs Capacity per caster
Soft Gray Polyurethane Wheel
Solid Nylon Body Construction
Steel Axle
Matte Black - Gray Wheel
Over All Height - 3 1/4"
Grip Ring Stem - 7/16" x 7/8" Long
Body Diameter meeting chair is 1 3/8"
Hard to Find Casters


TWHN-50U-BK-NS
50mm Stemless Caster with Soft Polyurethane Wheels
For Chairs where the stem is welded to the base..
Clcik here BEFORE you order this caster!
Great quality from Master Caster. Twin wheel nylon body caster. For use on chairs that were designed to use a Stemless Caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile.
50mm (2" Diameter) Hooded
Twin Wheel
100 lbs Dynamic Capacity per caster
Solid Nylon Construction
Soft Polyurethane Tires
Steel Axle
Black
Replacement Caster style without a stem. Accepts chairs with welded stem dimensions of 3/8" dia. up to 1-5/16" length.
Hard to Find Casters
50mm Euro & Standard Safety Caster with Soft Polyurethane Wheels
Minimizes chair movement when no weight is applied.
Allows smooth effortless chair rolling while seated.
Great quality from Master Caster. Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile. See our info about the safety caster on our "Safety Caster Page"
Standard Euro


TWHN-50U-BK-SCS


TWHN-50U-BK-SCE
Sold in Sets of 4 Casters or 5 Casters ONLY
50mm (2" Diameter) Hooded
Twin Wheel
110 lbs Capacity per caster
Soft Polyurethane Wheels
Solid Nylon Construction
Steel Axle
Over All Height - 2 3/8"
Grip Ring Stem - 7/16" x 7/8" Long"
1-1/2" diameter neck on Euro Style
Color Black
Hard to Find Casters


TWHN-55U-BK-ES
55mm Futura Euro Style Caster with Soft Polyurethane Tires.
The Euro Style to match the "Radius" of your base.
Great quality from Master Caster. Twin wheel nylon body caster. Black body with Black non-marking Soft Polyurethane tires on a nylon wheel. This is an excellent caster for some hardwood floors and tile. Top of the caster body is round to match the diameter of the chair base.
55mm (2 3/16" Diameter) Hooded
Twin Wheel 2 3/16" Diameter
100 lbs Dynamic Capacity per caster
Soft Polyurethane Tire
Solid Nylon Construction
Steel Axle
Matte Black
Grip Ring Stem - 7/16" x 7/8" Long
Over All Height - Stem Caster - 2 3/8"
1-1/2" diameter neck on Euro Style


Home | About Us | Tips & Tricks | Contact Us | Site Map
Website Maintenance & Design by Webster Site Design